TS-EMS
TS-EMS
The TS-EMS environmental monitoring system can perform in-station diagnostic vapor recovery monitoring (VRM) and secondary containment monitoring (SCM) and interface to an existing tank gauge.
STAND-ALONE ISD SYSTEM
The flexible architecture of the TS-EMS allows multiple applications to run concurrently, satisfying multiple monitoring needs. It includes both vapor recovery monitoring (VRM) software and optional secondary containment monitoring (SCM).
More Features
- Dispenser-based disabling prevents the entire site from shutting down in the event of an EVR failure.
- Wireless Flow Meter and Pressure Sensor interface option.
- Ethernet-ready, web-based remote access provides the user with remote access to VRM status information, reports, and alarm information using any web browser.
- Create custom rules to send e-mails and text messages on alarms and events directly from the console to service and compliance personnel.
- User-friendly touch screen interface with icon-based navigation.
- Scalable open architecture for easy and cost-saving future upgrades.
General
- Number of dispensers monitored: 16.
- Input channels: 2.
- Output only channels: 2.
- Display type: touch screen LCD.
- Printer type: impact.
- Volume units: gallons or liters.
- Display size: 320 × 240 pixels.
- Power requirements: 110 to 220 VAC, +15%, -10%, 150 Watt maximum, 1½ Amps.
- Operating temperature: 32° to 104 °F (0° to 40 °C).
- Storage temperature: -4° to 140 °F (-20° to 60 °C).
- LCD backlight contains mercury, dispose of properly.
Capabilities
The TS-EMS is built on an established open-system software platform.
- Standard Ethernet connection allows easy integration to existing wide area networks.
- XML-based software allows remote access to data without additional software.
- Graphical touch screen LCD allows text to be displayed in native language.
- Generic interface modules give flexibility in configuring station monitoring requirements.
- E-mail notification gives station owners real-time status information.
- Multiple printing options give flexibility in style and format of reports.
Approvals/Certifications
- UL, cUL, ATEX, IECEx
- Third party certification of leak detection capabilities
TS-EMS
| Model Number | Description |
|---|
- Appropriate DIM cable must be ordered separately.
- TEMS and TEMS3 systems can support up to six dispensers. TEMS2 systems can support up to twelve dispensers. All models can be expanded to support up to 16 dispensers with additional modules.
- The appropriate number of TS-VFM vapor flow meters and one TS-VPS vapor pressure sensor must be ordered separately to perform vapor recovery monitoring.
- TS-ACI modules and hook signal wiring are only required for balance site installs.
TS-EMS Console Hardware and Software Options
TS-EMS consoles come standard with the ability to perform vapor recovery monitoring. The following software and hardware options can be added to customize your console. The internal hardware options will be factory installed when ordered with the console.
Internal Hardware Options
| Model Number | Description |
|---|---|
| TS-MDMIB | (M) Internal modem, includes fax and data software capability |
Internal Software Options
| Model Number | Description |
|---|---|
| TS-SCM | Secondary containment monitoring |
TS-EMS Fuel Management System Console Interface Modules
TS-EMS consoles come standard with a power supply module, a controller module and a model dependent set of interface modules that can support up to 6 or 12 dispensers. In some situations non-standard module configurations may be required. Additional modules will be shipped separately from the EMS console. Six total modules can be installed with a maximum of four intrinsically safe modules and a maximum of three of any one kind of module.
Intrinsically Safe Modules
| Model Number | Description |
|---|---|
| TS-420IB | Pre-Installed 4-20 mA Module | 8 inputs | Intrinsically Safe | Compatible with TS-LSU500/X transducers and FMP-TEM, TS-VPS, and TS-SCCM sensors |
| TS-PRB | Pre-Installed Probe Module | 12 inputs | Compatible with TSP-LL2-XXX, TSP-LL2-XXX-I, FMP-LL3-XXX, and FMP-LL3-XXX-I probes; TSP-DMS-XX and FMP-XXX-U sensors; and VFM vapor flow meters |
Non-Intrinsically Safe Modules
| Model Number | Description |
|---|---|
| TS-10ARLY | Pre-Installed 10 Amp Relay Module | 6 outputs | 10 Amp | Compatible with high power dispenser shutdown control functions |
| TS-RLY | Pre-Installed Relay Module | 8 outputs | 2 Amp | Compatible with TS-LSU500/X transducers, TPI, and TS-SCCM control functions |
External Modules
| Model Number | Description |
|---|
- Order one TS-DTU/P and one TS-DRK/x install kit per dispenser. Order one additional TS-DTU/P for the console.
Dispenser Interface Module Cables
| Model Number | Description |
|---|---|
| TSP-BDCBL | Bennett® 515 only cable |
| TSP-GDCBL | Gilbarco™ cable |
| TSP-GSDCBL | Gilbarco™ G-Site™ cable |
| TSP-WDCBL | Wayne™ cable |
TS-EMS Enivornmental Monitoring System Ordering Guide
The TS-EMS environmental monitoring system comes standard with display, printer and dispenser interface module. An internal TS-MDMIB modem can be added as a hardware option. Order the TEMSDPI/VS if the secondary containment monitoring software option is required.
Catalogs
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0216 (UL) FFS Product Catalog.pdf | 62.67 MB | |
 |
FFS-0807 (EN) Product Catalogue.pdf | 48.43 MB | |
 |
FFS-0367 (UL) Site Starters Ordering Guide.pdf | 52.07 MB |
Manuals
| Title | Type | Size | |
|---|---|---|---|
 |
000-0526 INCON T5 Series LCD Screen Install Guide.pdf | 1.04 MB |
Drawings
| Title | Type | Size | |
|---|---|---|---|
 |
CD_FMS_TS-EMS_001.dwg | DWG | 0.44 MB |
 |
CD_FMS_TS-EMS_001.pdf | 0.1 MB |